Linux SoM
 | GSM/GPRS magnetic Antenna for TERRA-M board with cable. Features:
|
 | GSM/GPRS Rubber Antenna for TERRA-M board. Features:
|
 | GPS antenna with SMA male connector to use Daisy-7 add-on board.
|
 | FOX size prototyping board. |
 | Eurocard size (160x100 mm) prototyping board 2.54 mm pitch for FOX Board G20 or FOX Board LX832. |
 | Small breadboard with 170 tie points. Self-adhesive backing. Measures 45mm x 25mm (1.8"x 1.4"). |
 | IDC connector with 1.27mm spaced dual-row pin headers. The insulation displacement (IDC) contacts on these connectors allow them to be quickly and easily crimped onto FC-3754 flat ribbon cable for Daisy cabling system. This female socket is designed to be connected to the male header on the Daisy modules. A polarizing tab in the middle ensures the correct orientation. |
 | Set of 10 strips of 20x2 pin pitch 2.54mm lenght 6mm |
 | Set of 10 strips of 20x2 headers pitch 2.54 mm |
 | Set of 10 strips of 20x2 pin pitch 2.54mm lenght 12mm |
 | One Female and one Male connector at 60 pin 0.8mm pitch for Netus G20 carrier boards placement. For production batch this product is available in reel of 1000 pcs. Please contact us to have a quote. |
 | Lithium battery model CR1220 at 3 volt for RTC circuitry on: |
 | 1.10mm pitch microSD memory holder push-push type |
 | 1.10mm pitch microSD memory holder, hinge Type, |
 | Battery holder for lithium battery CR1220. Through hole mount. |
 | Battery holder for lithium battery CR1220. SMT mount. |
 | DS18B20 is a digital thermometer provides 9-bit to 12-bit Celsius temperature measurements. |
 | Set of 100 screws M2 length 4mm for daisy modules:
|
 | Set of 1000 screws M2 length 4mm for daisy modules:
|
 | Pack of 4 pcs of M2 spacer height 5 mm with metric thread internal to use with the screws M2X4 to mount the daisy module on a base panel. |
 | IDC connector with 1.27mm spaced dual-row pin headers. The insulation displacement (IDC) contacts on these connectors allow them to be quickly and easily crimped onto FLAT-20CM flat ribbon cable for Daisy cabling system. This female socket is designed to be connected to the male header on the Daisy modules. A polarizing tab in the middle ensures the correct orientation. | Datasheet | |
 | Daisy IDC male SMT connector for PCB mounting | Datasheet | |
 | 20 cm ribbon cable with 10 wires compatible with the Acme Daisy Cabling System. At least one of these cables is required to connect each Daisy module. if you need different lengths please consider making your own the cable using the IDC socket JJ-02291-10P-F and the flat cable FC-3754-1M. |
 | 1 meter of grey conductor flat cable, .025" pitch, 10 wires at 30 AWG, to use for Daisy wiring. | 3M Datasheet | |
 | RJ45 LAN Transformer Ethernet 10/100 Base-T connector |
 | USB A host connector |
|
|
Atmel© Certified Partner |
Documentation Terms of Use
Acme Systems provides this documentation "as is" without warranty or guarantees of any kind.
The mantainer of this site (Sergio Tanzilli), has gone to a great deal
of effort into making this documentation as correct as possible.
Acme Systems doesn't provide any direct support for the Open Source preinstalled software but provides, through
these pages and forum posts, all the information required to obtain the sources, install, use and update the
Open Source softwares runnable on the FOX Board, NetusG20, AriaG25 and Terra platforms.
Please note that all the preinstalled softwares, used on the Acme Systems products, are Open Source and you will
have to check the license terms provided (usually the GPL) by each author before using it in any commercial or non-commercial
product, by yourself.
Before sending emails or calling the Acme staff here are our contacts
please note that WE ARE MAINLY HARDWARE DESIGNERS and NOT LINUX GURUS so could be better to post
your questions directly to the forum listed below to be sure that all the contributors of this site and
the large software developers community will read and reply to your questions.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.
