FEATURES
LA-100 is a HI-FI designed to be interfaced with both HI-FI equipment and professional audio equipment.The grat linearity, over 400 kHz, and the very low distortion guarantee an absolute quality that is not possible to find in any other equipment in the sector. The very high headroom level allows the LA-100 to be used with every type of the most advanced professional equipment using much higher sial and lower impedances that th HI-FI standard. LA-100 has balanced and unbalanced inputs and outputs with connectors related to the two standards:
5 INPUT:
1-2-3 unbalanced high impedancewith RCA to JACK connectors on the rear panel.
Semi-fixed level controls on the front panel.
The first input also features a multipolar XLR connector intended for connection with a RiAA preamplifier.
4-5 balanced with XLR connector and +4dBu level. One front and one rear.
INSERT:
Balanced with XLR connector on the fornt panel.Level +4 dBu.
DRY / WET Control .
BALANCE: +/- 6 dB
EQUALIZER: BAXANDALL type with 3 controls.
Bass +/- 9 dB
Medium +/- 6 dB
High +/- 0 dB
2 OUTPUTS:
1 balanced, level +4 dBu. XLR Connectors + Jack TRS rear JACKS plus unbalanced output with adjustable level and RCA pin connectors. PHONES:
For headphones with impedance from 30 to 200 ohms. TRS Jack connector on the front panel. Optional for 600 ohm headphones.
VU-METER:
30 LEDs with microprocessor control
POWER SUPPLY:
Balanced transformer and linear stabilizer
FRAME:
Type RACK 19“ 2 units in stainless steel
Techninal Specification
| Channels | 2 |
| Input 4-5 Input level Input impedance |
Electronically balanced +4dBu, Max +28dBu > 10 kΩ |
| Input Hi z Input Level Input impedance |
Unbalanced -25dBu > Max 0dBu 100Ω |
| Insert Send Send Level Send Impedance |
Electronically balanced +4dBu, Max +28dBu 100Ω ( minimum external load 600Ω ). |
| Output1 Output Level Output Impedance |
Electronically balanced +4 dBu, Max +28 dBu 100Ω ( minimum external load 600Ω ) Unbalanced 8 dBu / -2 dBu |
| Output2 Output Level Output Impedance |
Electronically balanced +4 dBu, Max +28 dBu 100Ω ( minimum external load 600Ω ) |
| Balance control | +/- 6 dB |
| Equaliser | 30 LED microprocessor controlled |
| VU | +/- 6 dB |
| Bandwidth | 3 - 400.000 Hz -1dB, perfect square wave up to 50 KHz | Distortion + Noise | >0.005% ( typical 0.001 %) |
| Phones output Output Level Output Load Response |
Unbalanced Max 2.5 V 60/200 Ω. Min 30 Ω -3 dB 80 kHz |
| Connectors | Front Panel - 3 pole XLR / balanced Back Panel - 3 pole XLR / TRS jack balanced TRS jack unbalanced RCA pin unbalanced 5 Pole XLR for external RIAA Amplifier |
| Power Supply Operating Voltage Power Consumption Rear Panel AC mains Rear Panel Main Switch |
Linear Regulator (Balanced Transformer ) 220V 50 Hz, ( 110V 60 Hz version switchable ) 60 W IEC C13 16 A connector, AC mains cord with IEC Power On/Off switch |
| Construction Dimensions Weight |
2Unit, 19" rack mount metal box W 483 mm /19" / H 88 mm /3.5" /D 225 mm /8.8" 5 kg / 11lb |
