Motherboard designed to provide a reliable Home Automation solution based on Raspberry Pi CM3LPLUS industrial module

Please note: This code is related just to the carrier board. The Raspberry CM3L+ module is not included

Optional parts:

• CM3L+ - Raspberry Compute Module (Product CM3L+)
• CM3-HOME-CASE Plastic enclusure (Product CM3-HOME-CASE)
• MICROSD8G-E MicroSD
• WIFI-2 Wifi module
• AN-WIFI-01 or AN-WIFI-01 WiFi antennas

Raspberry Pi Compute Module versione 3+ for CM3-Home

Version without eMMC memory.

Enclosure for CM3-HOME board

Ultra slim 15W DIN rail power supply

• Universal input 85-264 VAC
• No load power consumption < 0.3W
• DC output voltage adjustable
• Protections: short circuit, overload, over voltage
• Led indicator for power on
• Useable to provide power supply to the CM3-Home

• Fully compatible with CM3-Panel, CM3-Home and Raspberry Pi 3 A+ and B+
• 5MP Omnivision 5647 camera module
• Still picture resolution: 2592 x 1944
• Video: supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 recording
• 15-pin MIPI camera serial interface
• Plugs directly into the CM3-Panel, CM3-Home and Raspberry Pi 3 A+ and B+ MIPI connector
• Size: 20 x 25 x 9mm
• Weight: 3g
• Fully compatible with many Raspberry Pi cases

SanDisk 8GB Industrial grade microSD

• Class 10 HC
• Temperature range: -25° to +85°
• Nand flash technology: MLC
• Datasheet
• TLC vs MLC memories

OEM Small USB 2.0 IEEE 802.11 b/g/n Wi-Fi compliant module based on the RaLink RT5370N chip. It works at 3.3V and can be configured also in Access Point mode.

This model requires an external antenna model AN-WIFI-01 or AN-WIFI-02.

WiFi PCB antenna with 11 cm cable and UMC 2mm connector to be plugged on WIFI-2 module.

| Antenna datasheet |

Antenna for WIFI-2 module

• Rubber antenna with FEMALE SMA connector
• RF cable with panel mountable MALE SMA connector and 2mm UMC connector with about 10 cm length cable

| Antenna datasheet | Cable datasheet |

USB to 3V3 serial converter ad 3.3 volt with separated pin plugs