Mini USB Wireless Adapter

• 5.8GHz - 2.4 GHz
• Support 802.11ac standard WiFi
• Compatible with 802.11b/g/n wireless devices
• High wireless transmission rate, dual band (2.4GHz/150Mpbs 5.8GHz/433Mbps)
• Support WPA/WPA2/WEP/802.1X/WMM data encryption
• Compatible with Raspberry Pi and all the Acme Systems Linux boards
• Compatible with Windows, Linux and MAC OS X PC
• Strong anti-interference ability
• Internal antenna
• Total size: 30x13x7 mm
• Length out USB port: 16mm

OEM Small USB 2.0 IEEE 802.11 b/g/n Wi-Fi compliant module based on the RaLink RT5370N chip. It works at 3.3V and can be configured also in Access Point mode.

This model requires an external antenna model AN-WIFI-01 or AN-WIFI-02.

OEM Small USB 2.0 IEEE 802.11 b/g/n Wi-Fi compliant module based on the RaLink RT5370N chip. It works at 3.3V and can be configured also in Access Point mode.

This model uses the internal PCB antenna. The operative range of this solution is limited to few meters. If you need a greater distance evaluate the model with external antenna.
Don't use the WIFI-2-IA model with Arietta G25 board because it hangs the CPU. Use the WIFI-2 instead

WiFi PCB antenna with 11 cm cable and UMC 2mm connector to be plugged on WIFI-2 module.

| Antenna datasheet |

Antenna for WIFI-2 module

• Rubber antenna with FEMALE SMA connector
• RF cable with panel mountable MALE SMA connector and 2mm UMC connector with about 10 cm length cable

| Antenna datasheet | Cable datasheet |

Antenna for WIFI-2 module

• Rubber antenna with MALE SMA connector
• RF cable with panel mountable FEMALE SMA connector and 2mm UMC connector with about 10 cm length cable

| Antenna datasheet | Cable datasheet |

Male strip 7x1 pin pitch 2mm

• Male strip
• 7x1 pin
• Pitch 2mm
• Used on WIFI-2 module

Female 7x1 pin pitch 2mm

• Female strip
• 7x1 pin
• Pitch 2mm
• Compatible with WIFI-2 module