Acme Systems srl - Electronic design and manufacturing since 2005

RoadRunner

RoadRunner D2

Info Doc

  • CPU Microchip SAMA5D27
  • Cortex A5 @ 500 MHz
  • Armhf architecture
  • DDR3L RAM 256 MB
  • QuadSPI 0/16/64/128MB
  • Size: 40x30 mm
  • Plug-in module
  • 200 pins 0.4 mm pitch
  • TFT parallel interface
  • Fully open source software
  • Boot from internal Quad SPI or external uSD/eMMC
  • Compatible with Debian, Yocto and Buildroot Linux distributions
  • Linux mainstream up to version 5.4 LTS

Acqua

Acqua A5

Info Doc

  • CPU Microchip SAMA5D31/D36
  • Cortex A5 @ 536 MHz
  • Armhf architecture
  • DDR2 RAM 256/512 MB
  • Nand FLASH 0/256 MB
  • On boar uSD socket
  • Size: 53x53 mm
  • Plug-in module
  • 150 pins 1.27 mm pitch
  • TFT parallel interface
  • Fully open source software
  • Boot from internal uSD/NAND flash or esternal eMMC
  • Compatible with Debian, Yocto and Buildroot Linux distributions
  • Linux mainstream up to version 5.4 LTS

Aria

Aria G25

Info Doc

  • CPU Microchip AT91SAMG25
  • ARM9 @ 400 MHz
  • Armel architecture
  • DDR2 RAM 128/256 MB
  • Size: 40x40 mm
  • SMT module
  • 96 pins 1.27 mm pitch
  • Fully open source software
  • Boot from external uSD or serial flash
  • Compatible with Debian, Yocto and Buildroot Linux distributions
  • Linux mainstream up to version 5.4 LTS

Arietta

Arietta G25

Info Doc

  • CPU Microchip AT91SAMG25
  • ARM9 @ 400 MHz
  • Armel architecture
  • DDR2 RAM 128/256 MB
  • Size: 53x25 mm
  • Plug-in module
  • 40 pins 2.54 mm pitch
  • Fully open source software
  • Boot from uSD
  • Compatible with Debian, Yocto and Buildroot Linux distributions
  • Linux mainstream up to version 5.4 LTS

CM3 Panel 7 basic

CM3-Panel

Info Doc

Raspberry CM3L+ 7 inch LCD panel

Thin and cheap 7 inch PC panel designed for the Raspberry Pi Compute Module 3+

  • 800x480 pixel 7 inch TFT
  • Socket for Raspberry Pi CM3L or CM3L+
  • 10 points capacitive touch
  • MIPI connector for Raspberry Pi Camera
  • WiFi @ 2.4 GHz or USB port
  • Operating temperature: -20° +70°

CM3 Panel 7 poe

CM3-Panel

Info Doc

Raspberry CM3L+ enhanced 7 inch LCD panel

Thin 7 inch PC panel designed for the Raspberry Pi Compute Module 3+

  • 800x480 pixel 7 inch TFT
  • Socket for Raspberry Pi CM3L or CM3L+
  • 10 points capacitive touch
  • MIPI connector for Raspberry Pi Camera
  • WiFi @ 2.4 GHz or 5.8GHz (optional)
  • Operating temperature: -20° +70°
  • Ethernet POE
  • 3 USB Host
  • RS485 or RS232
  • 1Relay
  • Hi-quality audio out up 384KHz@32bit
  • Filesystem safety power down
  • RTC with backup battery


Other products

  • FOX Board G20 Legacy Linux single board computer based on ARM 9 CPU
  • FOX Board LX832 Legacy Linux single board computer based on AXIS ETRAX 100LX CPU
  • Yarm 868mHz radio module
  • CM3 Home Home Automation carrier board designed for the Raspberry Pi Compute Module 3
  • Lola Led strip controller
  • HAT A3 RGB led panel controller
  • Terra Board Legacy Linux single board computers for M2M applications

Third party products