# FOX Board G20 V2 - Beta

@note The FOX Board V2 was an experiment and will not be available as standard product.

<img src="FOXG20-V2-BETA.jpg">

## Features of FOX Board G20 V2

*  Double microSD slot
*  4 on-board Daisy connectors 
*  Low EMI
*  Mini USB power supply connector instead of 3.5 plug
*  Power cycle on USB ports via 1-wire commands
*  1-wire temperature sensor on-board
*  Same J6 and J7 pin-out
*  J8 (the floppy-like power plug) removed
*  J16 (oLED) connector removd
*  Fully compatible with the NetusG20L 

## Turn-on the USB host ports

The two USB host ports on FOX Board G20 V2 are powered off by default at startup.

On this article is explained how to turn-on them at startup:

*  [USB host power control features](/foxg20v2_proto_howto-w1) 

If you want to try quickly this feature use this pre-compiled uImage:

*  [Kernel 2.5.38 uImage](./uImage) (MD5:b4c8b3aca5c644539946feeba326ce65)

Using this image you don't need to load the module w1_ds28ea00.ko.

## Schematics

* [FOX Board G20 - V2 Beta schematic](./FOXG20-V2-R2.pdf)