#Wirings between Arietta and microBUS™ sockets

* [Arietta4click dynamic pinout and dtb compiler](http://pinout.acmesystems.it)

<img src="./mikrobus_pinout_thumb_b.png">

<div class="row">
	<div class="col-md-6" markdown="1">
| Arietta Pin | Atmel name | Signal    | MikroBUS&#8482; 1 |
|-------------|------------|-----------|------------|
| J4.34       | PB11       | ADC0      | AN         |
| J4.33       | PC3        | PC3       | RST        |
| J4.12       | PA31       | SPI1-CS2  | CS         |
| J4.7        | PA23       | SPI1-CK   | SCK        |
| J4.10       | PA21       | SPI1-MISO | MISO       |
| J4.8        | PA22       | SPI1-MOSI | MOSI       |
| J4.5        |            | +3V3      | +3V3       |
| J4.9        |            | GND       | GND        |
| J4.38       | PB13       | PWM2      | PWM        |
| J4.35       | PC2        | PC2       | INT        |
| J4.24       | PA1        | RXD0      | RX         |
| J4.23       | PA0        | TXD0      | TX         |
| J4.37       | PC1        | SCL1      | SCL        |
| J4.39       | PC0        | SDA1      | SDA        |
| J4.1        |            | +5V       | +5V        |
| J4.9        |            | GND       | GND        |
	</div>
	
	<div class="col-md-6" markdown="1">
| Arietta Pin | Atmel name | Signal    | MikroBUS&#8482; 2 |
|-------------|------------|-----------|------------|
| J4.36       | PB12       | ADC1      | AN         |
| J4.29       | PC28       | PC28      | RST        |
| J4.14       | PA30       | SPI1-CS3  | CS         |
| J4.7        | PA23       | SPI1-CK   | SCK        |
| J4.10       | PA2        | SPI1-MISO | MISO       |
| J4.8        | PA22       | SPI1-MOSI | MOSI       |
| J4.5        |            | +3V3      | +3V3       |
| J4.9        |            | GND       | GND        |
| J4.40       | PB14       | PWM3      | PWM        |
| J4.31       | PC4        | PC4       | INT        |
| J4.27       | PA6        | RXD1      | RX         |
| J4.28       | PA5        | TXD1      | TX         |
| J4.37       | PC1        | SCL1      | SCL        |
| J4.39       | PC0        | SDA1      | SDA        |
| J4.1        |            | +5V       | +5V        |
| J4.9        |            | GND       | GND        |
	</div>
</div>

##Arietta G25 pinout configuration

This is the pin configuration made with the <a href="http://dts.acmesystems.it/arietta" target="_blank">DTS builder</a>
to use on Arietta G25 to have two mikroBUS&#8482; sockets with all the bus signals requested.

<img src="./pinout.jpg" class="float_full">