# PCF8574 keypad

@wip

Inside the kernel is available a simple input driver that can be used in conjunction with D22 to create a simple keypad.

The driver is available inside <b>linux/driver/input/misc/pcf8574_keypad.c</b>. 

This code is also an excellent example on how to use i2c bus and interrupt, generated by D22, inside the kernel.

## Using the interrupt function

The Daisy-22 allow you also to use the irq capability of PCF8574, those chip return a irq each time that 
one of the pins change it status. Also if YOU provocate that change.

Anyway to receive the irq you should write a kernel module. For your convenience some code as draft.

<pre class="prettyprint">
<code>
//This is not a ready to use linux driver, but just a concept.

#include "linux/gpio.h"
#include "linux/interrupt.h"
#include "linux/i2c.h"

#define GPIO_INT 95   /* the gpio id for irq input (PB31 in the example) */

int state, oldstate;
struct i2c_client *  	client;
//...

static irqreturn_t my_driver_irq_handler(int irq, void *dev_id)
{
	unsigned char state = i2c_smbus_read_byte(client);

	if (oldstate != state) {
	// do something
	}

	return IRQ_HANDLED;
}

int __init my_driver_init(void) {
	//...somethings

	at91_gpio_request(GPIO_INT, 0);
	ret = request_irq(GPIO_INT, NULL, my_driver_irq_handler,
		DRV_NAME, NULL);
	if (ret) {
		dev_err(client, "IRQ %d is not free\n", client);
		goto fail_free_device;
	}
}

module_init(my_driver_init);
/* Good luck! */
</code>
</pre>