ARIETTA-G25
EUR 25.00


ARM9 Linux Embedded Module (128MB)

Arietta G25 is a small and low-cost multi-chip module that integrates:

  • a ARM9 @ 400Mhz CPU Atmel AT91SAM9G25
  • a 128MB of DDR2 RAM
  • up to 3 USB 2.0 host ports
  • 20x2 pads for strip pitch 2.54mm (100mil)

Basic Version with no strips mounted. If you need to have any strip mounted take a look to the Welding services

| Product description |

ARIETTA-G25-256
EUR 30.00


ARM9 Linux Embedded Module (256MB)

Arietta G25 is a small and low-cost multi-chip module that integrates:

  • a ARM9 @ 400Mhz CPU Atmel AT91SAM9G25
  • a 256MB of DDR2 RAM
  • up to 3 USB 2.0 host ports
  • 20x2 pads for strip pitch 2.54mm (100mil)

Basic Version with no strips mounted. If you need to have any strip mounted take a look to the Welding services

| Product description |

COMBO-100
EUR 65.00


Arietta G25 evaluation kit

Basic kit to evaluate the Arietta G25 SOM

Parts included:

  • ARIETTA-G25-256 (256MB of RAM)
  • WIFI-2 WiFi module (mounted) with PCB antenna
  • 8GB Bootable microSD with Debian Linux preinstalled
  • Debug port interface + CABLE-01 mini USB data cable
  • PS5V1A-USB2 Wall adapter + CABLE-02 Micro USB power cable
  • 6 pins male connector mounted on DPI port
  • 20+20 pins male connector (unmounted)
  • 20+20 pins female connector (unmounted)

LEDPANEL-01
EUR 75.00


Led panel 32x32 kit

All the electronic part you need to mount a RGB 32x32 Led panel:

  • Arietta G25 with 128 MB of RAM
  • RGB led panel 32x32 P6
  • 8GB microSD with Linux preinstalled
  • Wifi module and PCB antenna
  • 5V 4A wall adapter power supply
  • LPA-01 PCB, connectors and cables

IKEA RIBBA photo frame is not included

| Product description |

XTERM-01
EUR 25.00


2.8 inch TFT display with resistive touch for Arietta G25
  • 2.8 inch TFT display
  • Resistive touch screen
  • USB host port

Arietta G25 not included

| Product description |

LPA-01-PCB
EUR 4.00


RGB led panel adapter (PCB)

Adapter to mount an Arietta G25 on a 32x32 P6 RGB led panel model LEDRGB-02.

| Product description |

DEBM8G-ARIETTA
EUR 12.00


Debian microSD 8GB for Arietta-G25

Bootable 8GB microSD with a preinstalled Debian Linux distribution for Arietta G25 board.

Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included.

| Product description |

DEBM16G-ARIETTA
EUR 16.00


Debian microSD 16GB for Arietta-G25

Bootable 16GB microSD with a preinstalled Debian Linux distribution for Arietta G25 board.

Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included.

| Product description |

DEBM32G-ARIETTA
EUR 22.00


Debian microSD 32GB for Arietta-G25

Bootable 32GB microSD with a preinstalled Debian Linux distribution for Arietta G25 board.

Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included.

| Product description |

Normally the microSD sold on this catalog are the following:

Unfortunately we can't ensure the availability of the same models so we could change them with an equivalent or better features/brand/model (usually Sony or SanDisk).

It is possible to make by yourself bootable microSD using blank cards following this article:

Binary repository
WIFI-2
EUR 7.00


WiFi USB module

OEM Small USB 2.0 IEEE 802.11 b/g/n Wi-Fi compliant module based on the RaLink RT5370N chip. It works at 3.3V and can be configured also in Access Point mode.

This model requires an external antenna model AN-WIFI-01 or AN-WIFI-02.

| Product description |

AN-WIFI-01
EUR 3.50


WiFi pcb external antenna

WiFi PCB antenna with 11 cm cable and UMC 2mm connector to be plugged on WIFI-2 module.

| Antenna datasheet |

AN-WIFI-02
EUR 7.00


WiFi external antenna with SMA cable
  • RF cable with panel mountable SMA connector and UMC 2mm connector to be plugged on a WIFI-2 module.
  • WiFi rubber antenna

| Antenna datasheet | Cable datasheet |

PS5V1A-USB2
EUR 8.00


Switching power supply 5V 1A - 2 USB out

Features:

  • European AC input: 100-240VAC 50/60Hz 0.2A
  • DC output: 2 USB power out plug.
    • Output 1: 5VDC/500mA
    • Output 2: 5VDC/500mA
  • A microUSB cable (code CABLE-02) is request for Arietta G25

CABLE-02
EUR 1.50


Micro USB data cable

Micro USB data cable

MWS-01
EUR 0.80


WIFI-2 on Arietta G25

Manual welding of WIFI-2 on the Arietta G25. WIFI-2 module not included.

STRIP-001
EUR 0.60


Male strip 20x2 pin pitch 2.54mm
  • Male strip
  • 20x2 pin
  • Pitch 2.54mm (100mils)
  • Pin lenght 6mm

STRIP-002
EUR 0.80


Female strip 20x2 pin pitch 2.54mm
  • Female strip
  • 20x2 pin
  • Pitch 2.54mm (100mils)

STRIP-005
EUR 0.80


Male strip 20x2 pin 90 degree pitch 2.54mm
  • Male strip
  • 20x2 pin 90 degree
  • Pitch 2.54mm (100mils)

STRIP-006
EUR 1.40


Female strip 20x2 pin 90 degree pitch 2.54mm
  • Female strip
  • 20x2 pin 90 degree
  • Pitch 2.54mm (100mils)

DPI
EUR 8.00


Debug Port Interface

DPI is an USB-to-serial interface to link the Acme boards debug port to a PC USB host port and have access at the Linux system console using a terminal emulator program like minicom, putty, hyperterminal, etc.

| Product description |

CABLE-01
EUR 1.50


Mini USB data cable

Mini USB data cable

STRIP-008
EUR 0.40


6 pin male strip for debug port

Male 6 pin strip ptch 2.54 mm (100 mils) for the Arietta G25 debug port

MWS-01
EUR 0.80


WIFI-2 on Arietta G25

Manual welding of WIFI-2 on the Arietta G25. WIFI-2 module not included.

MWS-02
EUR 1.20


DPI pin strip on Arietta G25

Manual welding of DPI pin strip on the Arietta G25 including the DPI connector.

MWS-03
EUR 1.60


Socket on Arietta G25 J4 top side

Manual welding of a 20x2 pitch 2.54mm female connector on the top side of Arietta G25 including the STRIP-002 connector.

MWS-04
EUR 1.60


Socket on Arietta G25 J4 bottom side

Manual welding of a 20x2 pitch 2.54mm female connector on the bottom side of Arietta G25 including the STRIP-002 connector.

MWS-05
EUR 1.40


Header on Arietta G25 J4 top side

Manual welding of a 20x2 pitch 2.54mm male connector on the top side of Arietta G25 including the STRIP-001 connector.

MWS-06
EUR 1.40


Header on Arietta G25 J4 bottom side

Manual welding of a 20x2 pitch 2.54mm male connector on the bottom side of Arietta G25 including the STRIP-001 connector.

MWS-07
EUR 2.20


90 degree socket on Arietta G25 J4 top side

Manual welding of a 20x2 pitch 2.54mm 90 degree female connector on the top side of Arietta G25 including the STRIP-006 connector.

MWS-08
EUR 1.60


90 degree header on Arietta G25 J4 top side

Manual welding of a 20x2 pitch 2.54mm 90 degree male connector on the top side of Arietta G25 including the STRIP-005 connector.