Displays

DAISY-24 : Alphanumeric I2C 16x2 LCD module + 4 push buttons EURO 24.00

Daisy-24 mini alphanumeric I2C 16x2 characters LCD module with 4 push buttons. Usable as Terra Board front panel or as normal Daisy module for other board with Daisy connectors.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM). It is not needed if you plug it directly on a Terra board.

| Product description | Daisy catalog |

LCD-1 : Mini size 16x2 characters I2C LCD EURO 6.00

Winstar display model WO1602I-TFH-AT#

Black on white Alphanumeric characters: 16 colums x 2 lines
Backlight type: LED, White
LCD mode: FSTN positive
I2C interface
Power supply: 3.3 or 5 volt Datasheet
How to use it

LCD-2 : Normal size 20x4 characters LCD EURO 5.00

Winstar display model WH2004A-TMI-ET#

SURPLUS SALE: Last 22 pieces are still available

White on blue alphanumeric characters: 20 colums x 4 lines
Backlight type: LED, White
LCD mode: STN Negative, Blue
8 or 4 bit interface HD44780
Power supply 5 volt
Datasheet

LCD-3 : 3.2 inch LCD TFT display with resistive touch screen EURO 63.00

4D Systems LCD display model uLCD-32PTU

3.2 inch LCD TFT
Resistive touch panel
240x320 pixel
65K colors
Picaso graphic processor.

Wireable to the Daisy Cabling Systems using a DAISY-15-R adapter.

| Product description | How to use it |

LCD-4 : Eastrising COG 16x2 LCD EURO 2.00

COG alphanumeric 16x2 LCD white on blue with parallel interface. FPC SMD connector included.

SURPLUS SALE: This product is discontinued. Last few pieces are still available

DAISY-15-R : Daisy adapter for 4DSystems (LCD-3) display EURO 5.00

Daisy adapter for LCD-3 display (4Dsystems ULCD-32PTU)

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |

Acme Systems srl
Via Aldo Moro 53 - 00055 Ladispoli (RM) - Italy
P.IVA/C.F. 08114831004
Tel +39.06.99.12.187 - Fax +39.06.622.765.31
http://www.acmesystems.it -
Iscritta al Registro delle Imprese di Roma al n. 08114831004

Documentation Terms of Use
Acme Systems provides this documentation "as is" without warranty or guarantees of any kind. The mantainer of this site (Sergio Tanzilli), has gone to a great deal of effort into making this documentation as correct as possible. Acme Systems doesn't provide any direct support for the Open Source preinstalled software but provides, through these pages and forum posts, all the information required to obtain the sources, install, use and update the Open Source softwares runnable on the FOX Board, NetusG20, AriaG25 and Terra platforms. Please note that all the preinstalled softwares, used on the Acme Systems products, are Open Source and you will have to check the license terms provided (usually the GPL) by each author before using it in any commercial or non-commercial product, by yourself. Before sending emails or calling the Acme staff here are our contacts please note that WE ARE MAINLY HARDWARE DESIGNERS and NOT LINUX GURUS so could be better to post your questions directly to the forum listed below to be sure that all the contributors of this site and the large software developers community will read and reply to your questions.

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.