Atmel© Certified Partner

Terra - Linux embedded SBS for GPRS applications

Terra board is a complete hardware solution conceived to:

Main Features

  • Aria G25 SoM with ARM9 @ 400Mhz and 256Mbyte of RAM
  • Three USB 2.0 Host ports with separate power supply control:
    • Port A hi-speed
    • Port B hi-speed
    • Port C full-speed
  • Holder for bootable microSD
  • Ethernet 10/100 LAN port
  • Power supply input: 9 to 28 VDC
  • Placement for an optional 1-wire thermal sensor DS18B20
  • Placement for an optional front panel 16x2 LCD module
  • Connectors for up to 7 Daisy add-on modules
  • Ready for end purpose enclosure available for Terra and up to 4 Daisy add-on boards
  • Size: 10x10cm
  • Designed for the Teko Tekal 31.29/30 enclosure
  • CE compliance
  • ROHS and REACH compliance
  • EmDebian 7.1 Wheezy with Linux 3.10 available

TERRA-M extra features

  • Quectel M95 quad-band GPRS module
  • Holder for GSM SIM card
  • SMA connector for GSM antenna
  • CE compliance
  • ROHS and REACH compliance

Terra is available in two versions:

Description Code
Basic version (without GPRS modem) TERRA
M2M version with GPRS modem on-board TERRA-M



Optional front panel

It is possible to insert a DAISY-24 module LCD + pushbuttons front panel as shown below:

Enclosure solutions

An already drilled enclosure is available for Terra and Terra-M board with or without DAISY-24 front panel.

Using the FRAME-1 accessory it is possible to fix up to two Daisy modules in the same case.

If DAISY-24 is not requested it is possible to place up to four Daisy modules in the same case using two FRAME-1 accessory supports.

Custom drilled TERRACASE panels can be request with a small extra cost.

TERRA board Daisy connectors pin-out

D10 - ttyS4 and I2C bus 0

Pin # IC Pin Default Alt ID 2.6x ID 3.1x Aria pin Note
D10.1 3V3 N1, E24, S1, W24 Power supply 3.3 Volt
D10.2 PC22 TXD3 GPIO 118 86 E2 Serial line TXD /dev/ttyS4
D10.3 PC23 RXD3 GPIO 119 87 E3 Serial line RXD /dev/ttyS4
D10.4 PC24 RTS3 GPIO 120 88 E4 Serial line RTS /dev/ttyS4
D10.5 PC25 CTS3 GPIO 121 89 E5 Serial line CTS /dev/ttyS4
D10.6 PC26 GPIO 122 90 E6
D10.7 PA30 SDA0 GPIO 30 62 W17 I2C Bus 0 /dev/i2c-0 data
D10.8 PA31 SCL0 GPIO 31 63 W18 I2C Bus 0 /dev/i2c-0 clock
D10.9 5V0 Power supply 5V
D10.10 GND N24, E1, S24, W1 Power supply GND

D11 - 8 GPIO

Pin # IC Pin Default Alt ID 2.6x ID 3.1x Aria pin Note
D11.1 3V3 N1, E24, S1, W24 Power supply 3V3
D11.2 PC16 GPIO UTXD1 112 80 N18 GPIO or TXD /dev/ttyS6
D11.3 PC17 GPIO URXD1 113 81 N19 GPIO or RXD /dev/ttyS6
D11.4 PC18 GPIO PWM0 114 82 N20 GPIO or PWM output (hw)
D11.5 PC19 GPIO PWM1 115 83 N21 GPIO or PWM output (hw)
D11.6 PC20 GPIO PWM2 116 84 N22 GPIO or PWM output (hw)
D11.7 PC21 GPIO PWM3 117 85 N23 GPIO or PWM output (hw)
D11.8 PC2 GPIO TIOA3 98 66 N4 GPIO or PWM output (tc)
D11.9 PC3 GPIO TIOB3 99 67 N5 GPIO or PWM output (tc)
D11.10 GND N24, E1, S24, W1 Power supply GND

D12 - 8 GPIO

Pin # IC Pin Default Alt ID 2.6x ID 3.1x Aria pin Note
D12.1 3V3 N1, E24, S1, W24 Power supply 3.3 Volt
D12.2 PC8 GPIO UTXD0 104 72 N10 GPIO or TXD /dev/ttyS5
D12.3 PC9 GPIO URXD0 105 73 N11 GPIO or RXD /dev/ttyS5
D12.4 PC10 GPIO PWM0 106 74 N12 GPIO or PWM output (hw)
D12.5 PC11 GPIO PWM1 107 75 N13 GPIO or PWM output (hw)
D12.6 PC12 GPIO TIOA5 108 76 N14 GPIO or PWM output (tc)
D12.7 PC13 GPIO TIOB5 109 77 N15 GPIO or PWM output (tc)
D12.8 PC14 GPIO 110 78 N16
D12.9 PC15 GPIO 111 89 N17
D12.10 GND N24, E1, S24, W1 Power supply GND

D13 - tty2 and GPIO

Pin # IC Pin Default Alt ID 2.6x ID 3.1x Aria pin Note
D13.1 3V3 N1, E24, S1, W24 Power supply 3.3 Volt
D13.2 PA5 TXD1 GPIO 37 5 S18 Serial line TXD /dev/ttyS2
D13.3 PA6 RXD1 GPIO 38 6 S17 Serial line RXD /dev/ttyS2
D13.4 PC27 RTS1 GPIO 123 91 E7 Serial line RTS /dev/ttyS2
D13.5 PC28 CTS1 GPIO 124 92 E8 Serial line CTS /dev/ttyS2
D13.6 PC29 GPIO 125 93 E9
D13.7 PC0 GPIO SDA1 96 64 N2 GPIO or I2C bus 1 /dev/i2c-1 data
D13.8 PC1 GPIO SCL1 97 65 N3 GPIO or I2C bus 1 /dev/i2c-1 clock
D13.9 5V0 Power supply
D13.10 GND N24, E1, S24, W1 Power supply GND

D14 - ADC or GPIO

Pin # IC Pin Default Alt ID 2.6x ID 3.1x Aria pin Note
D14.1 3.3V N1, E24, S1, W24 Power supply 3.3 Volt
D14.2 AVDD 3.24V Clean 3.24V out for A/D circuitry
D14.3 ADVREF W19
D14.4 GND N1, E24, S1, W24 Power supply 3.3 Volt
D14.5 PB11 AD0 GPIO 75 43 W23
D14.6 PB12 AD1 GPIO 76 44 W22
D14.7 PB13 AD2 GPIO 77 45 W21
D14.8 PB14 AD3 GPIO 78 46 W20
D14.9 5V0 Power supply 5 Volt
D14.10 GND N24, E1, S24, W1 Power supply GND

D15 - SPI bus 0 or GPIO

Pin # IC Pin Default Alt ID 2.6x ID 3.1x Aria pin Note
D15.1 3V3 N1, E24, S1, W24 Power supply 3.3 Volt
D15.2 PA12 SPI-0 MOSI GPIO 44 12 S11
D15.3 PA11 SPI-0 MISO GPIO 43 13 S12
D15.4 PA13 SPI-0 SPCK GPIO 45 14 S10
D15.5 PA14 SPI-0 NPCS0 GPIO 46 15 S9
D15.6 PA7 SPI-0 NPCS1 GPIO 39 7 S16
D15.7 PA1 RXD0 SPI-0 NPCS2 33 1 S22
D15.8
D15.9 5V0 Power supply 5 Volt
D15.10 GND N24, E1, S24, W1 Power supply GND

D16 - SSC (I2S) and I2C bus 0 or GPIO

Pin # IC Pin Default Alt ID 2.6x ID 3.1x Aria pin Note
D16.1 3V3 N1, E24, S1, W24 Power supply 3.3 Volt
D16.2 PA29 GPIO RF 61 29 W16
D16.3 PA27 GPIO RD 59 27 W14
D16.4 PA24 GPIO TK 56 24 W11
D16.5 PA25 GPIO TF 57 25 W12
D16.6 PA26 GPIO TD 58 26 W13
D16.7 PA30 SDA0 GPIO 63 31 E9 I2C bus 0 /dev/i2c-0 data
D16.8 PA31 SCL0 GPIO 62 30 E11 I2C bus 0 /dev/i2c-0 data
D16.9 PA28 GPIO RK 60 28 W15
D16.10 GND N24, E1, S24, W1 Power supply GND

D17 - tty1 and I2C bus 0 or GPIO (optional)

 Note:   This connector is not available on the TERRA-M because is covered by the GSM module.

On the TERRA board (basic model without the GPRS module) it is not mounted by default. If you need it please ask for a special version.

Pin # IC Pin Default Alt ID 2.6x ID 3.1x Aria pin Note
D17.1 3V3 N1, E24, S1, W24 Power supply 3.3 Volt
D17.2 PA0 TXD0 GPIO 32 0 S23 Serial line TXD /dev/ttyS1
D17.3 PA1 RXD0 GPIO 33 1 S22 Serial line RXD /dev/ttyS1
D17.4 PA2 RTS0 GPIO 34 2 S21 Serial line RTS /dev/ttyS1
D17.5 PA3 CTS0 GPIO 35 3 S20 Serial line CTS /dev/ttyS1
D17.6 PA4 GPIO 36 4 S19
D17.7 PC0 GPIO SDA1 96 64 N2 GPIO or I2C bus 1 /dev/i2c-1 data
D17.8 PC1 GPIO SCL1 97 65 N3 GPIO or I2C bus 1 /dev/i2c-1 clock
D17.9 5V0 Power supply 5 Volt
D17.10 GND N24, E1, S24, W1 Power supply GND

TERRA Board

This is the catalog of single parts related to the Terra Board.
Visit the evaluation kit catalog to save money and have all you need to getting start.


EUR 319.00



COMBO-M2

Enhanced TERRA-M board kit (GSM/GPRS)

Enhanced kit to evaluate the Aria G25 SoM or to develop applications on TERRA-M board SBC.

Parts included:

  • One TERRA-M Board (Code TERRA)
  • A bootable microSD with Debian Linux preinstalled
  • One Debug port interface (Code DPI)
  • One USB data cable for DPI
  • One wall adapter 12 volt @ 2A switching power supply (Code PS12V2A-EU)
  • One Teko Tekal enclosure
  • One Daisy-24 lcd module
  • One Lithium battery model CR1220 at 3 volt for RTC circuitry (Code CH23-1220)
  • GSM antenna with 2 mt cable

| Product description | Terra catalog


EUR 239.00



COMBO-T2

Enhanced TERRA board kit

Enhanced kit to evaluate the Aria G25 SoM or to develop applications on TERRA board SBC.

Parts included:

  • One TERRA Board (Code TERRA)
  • A bootable microSD with Debian Linux preinstalled
  • One Debug port interface (Code DPI)
  • One USB data cable for DPI
  • One wall adapter 12 volt @ 2A switching power supply (Code PS12V2A-EU)
  • One Teko Tekal enclosure
  • One Daisy-24 lcd module
  • One Lithium battery model CR1220 at 3 volt for RTC circuitry (Code CH23-1220)

| Product description | Terra catalog |


EUR 249.00



TERRA-M

Linux embedded board for fast prototyping

TERRA is a carrier board conceived both to evaluate the Aria G25 SoM and to make prototypes or small production batches of OEM equipments using the Daisy cabling system.

The TERRA-M variation is equiped with a GSM/GPRS Quectel M95 quad band modem, a SIM holder and a SMA connector for an external GSM antenna.

| Product description | Terra catalog |


EUR 169.00



TERRA

Linux embedded board for fast prototyping

TERRA is a carrier board conceived both to evaluate the Aria G25 SoM and to make prototypes or small production batches of OEM equipments using the Daisy cabling system.

| Product description | Terra catalog |


EUR 28.00



TERRACASE

Teko enclosure for Terra Board

Alluminium and ABS enclosure for TERRA and TERRA-M board.


EUR 15.00



PS12V2A-EU

Switching wall mount power supply for TERRA Board

Switching wall mount power supply 12V 2A with european plug for TERRA Board


| Product description... |


EUR 8.00



DPI

Debug Port Interface

DPI is an USB-to-serial interface to link the Acme boards debug port to a PC USB host port and have access at the Linux system console using a terminal emulator program like minicom, putty, hyperterminal, etc.


| Product description... |


EUR 14.00



DEBM8G-ARIA

Debian microSD 8GB for Aria-G25

Bootable 8GB microSD with a preinstalled Debian Linux distribution for Aria G25 board.

Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included.

| Product description |


EUR 18.00



DEBM16G-ARIA

Debian microSD 16GB for Aria-G25

Bootable 16GB microSD with a preinstalled Debian Linux distribution for Aria G25 board.

Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included.

| Product description |


EUR 24.00



DEBM32G-ARIA

Debian microSD 32GB for Aria-G25

Bootable 32GB microSD with a preinstalled Debian Linux distribution for Aria G25 board.

Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included.

| Product description |


EUR 6.00



AN-GSM-RUBBER-SMA-M

GSM rubber antenna

GSM/GPRS Rubber Antenna for TERRA-M board or DAISY-31 M-Bus adapter.

Features:

  • Gain: 2dB
  • Antenna length: 50 mm
  • Connector: SMA R/A male
  • Frequency: 850/1900MHz or 900/1900MHz
  • Impedance: 50 Ohm


EUR 8.00



AN-GSM-CABLE-SMA-M

GSM 2m cable antenna

GSM/GPRS magnetic Antenna for TERRA-M board with cable.

Features:

  • Cable length: 2 meter
  • Antenna height: 105 mm
  • Connector: SMA R/A male
  • Frequency: 850/1900MHz or 900/1900MHz
  • Gain: 3dB


EUR 3.00



CH23-1220

3V Lithium battery

Lithium battery model CR1220 at 3 volt for RTC circuitry on:


EUR 3.00



FLAT-20CM

20cm flat cable with sockets for Daisy wiring

20 cm ribbon cable with 10 wires compatible with the Acme Daisy Cabling System.

At least one of these cables is required to connect each Daisy module.

if you need different lengths please consider making your own the cable using the IDC socket JJ-02291-10P-F and the flat cable FC-3754-1M.


EUR 79.00



DAISY-7

GPS-MEMS daisy module

Daisy-7 is a 9 Degrees of Freedom module (9DOF) with digital MEMS (accelerometer, gyroscope, compass, barometer) and a GPS receiver IC in just 4x4cm.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |


EUR 12.00



GPSANT

GPS active antenna

GPS active antenna with SMA male connector to use Daisy-7 add-on board.


EUR 25.00



DAISY-10

Daisy isolated RS485/422 module

DAISY-10 is an isolated RS485/RS422 interface.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |


EUR 16.00



DAISY-9

Daisy RS232 module

DAISY-9 is RS232 DTE serial interface, not optoisolated, with TXD, RXD, CTS and RTS signals.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |


EUR 29.00



DAISY-18

4 channel industrial range optoisolated input (0-48 volt)

DAISY-18 is an opto-isolated 0-48 volt 4ch input for industrial purposes.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |


EUR 29.00



DAISY-19

4 channel industrial range optoisolated output (0-48 volt)

DAISY-19 is an opto-isolated 0-48 volt solid state 4ch switch for industrial purposes.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |


EUR 12.00



DAISY-20

Four channel A/D converter

Front-end for the 4 channel A/D 10bits converter built-in the Atmel CPU.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |


EUR 14.00



DAISY-24

Alphanumeric I2C 16x2 LCD module + 4 push buttons

Daisy-24 mini alphanumeric I2C 16x2 characters LCD module with 4 push buttons. Usable as Terra Board front panel or as normal Daisy module for other board with Daisy connectors.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM). It is not needed if you plug it directly on a Terra board.

| Product description | Daisy catalog |


EUR 2.00



DAISY-30

Adapter for XBee modules

Daisy to XBee module adapter

  • Xbee module not included

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |


EUR 5.00



DAISY-12

Prototyping board

DAISY-12 is a 40x40 mm prototyping board with daisy IDC connector mounted and small soldering area to create your custom daisy add-on module.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |


EUR 6.00



FRAME-1

Board support and daisy proto board

Board support for DAISY modules and prototyping board for Terra and Teko enclosure.

| More info... |


EUR 4.00



S100M2X4

Set of 100 screws M2X4 for daisy modules

Set of 100 screws M2 length 4mm for daisy modules:

  • Type of cut: Phillips
  • Plating material zinc
  • Length 4mm
  • Brand: Kraftberg


EUR 4.00



S100M2NUT

Set of 100 nuts for M2 screws for daisy modules

Set of 100 nuts M2 for daisy modules:

  • Plating material zinc
  • Brand: Kraftberg


EUR 36.00



S1KM2X4

Set of 1000 screws M2X4 for daisy modules

Set of 1000 screws M2 length 4mm for daisy modules:

  • Type of cut: Phillips
  • Plating material: Zinc
  • Length: 4mm
  • Brand: Kraftberg


EUR 0.50



BSP2X5

Pack of 4 brass spacer studs for daisy modules

Pack of 4 pcs of M2 spacer height 5 mm with metric thread internal to use with the screws M2X4 to mount the daisy module on a base panel.