WIFI-4 - USB WiFi module 5.8GHz-2.4GHz

Features

  • 5.8GHz - 2.4GHz
  • Support 802.11ac standard WiFi
  • Compatible with 802.11b/g/n wireless devices
  • High wireless transmission rate, dual band (2.4GHz/150Mpbs 5.8GHz/433Mbps)
  • Support WPA/WPA2/WEP/802.1X/WMM data encryption
  • Compatible with Raspberry Pi and all the Acme Systems Linux boards
  • Compatible with Windows, Linux and MAC OS X PC
  • Strong anti-interference ability
  • External antenna
  • Power supply: 5VDC

Linux Kernel config

With make ARCH=arm menuconfig set these flags:

Device Drivers -->
    [*] Network device support --->
        [*] Wireless LAN --->
            MediaTek MT76x0U (USB) support

Install the binary nonfree firmware on Debian

From the Debian command line type:

cd /lib/firmware
sudo mkdir mediatek
cd mediatek 
sudo wget http://anduin.linuxfromscratch.org/sources/linux-firmware/mediatek/mt7610u.bin

Then reboot with:

sudo reboot     

Datasheet

Buy on-line


EUR 12.00


WIFI-3 - Mini USB WiFi adapter 5.8GHz-2.4GHz

Mini USB Wireless Adapter

  • 5.8GHz - 2.4 GHz
  • Support 802.11ac standard WiFi
  • Compatible with 802.11b/g/n wireless devices
  • High wireless transmission rate, dual band (2.4GHz/150Mpbs 5.8GHz/433Mbps)
  • Support WPA/WPA2/WEP/802.1X/WMM data encryption
  • Compatible with Raspberry Pi and all the Acme Systems Linux boards
  • Compatible with Windows, Linux and MAC OS X PC
  • Strong anti-interference ability
  • Internal antenna
  • Total size: 30x13x7 mm
  • Length out USB port: 16mm
| How to use it on Linux |

EUR 7.00


WIFI-2 - WiFi USB module (Ext. antenna)

OEM Small USB module

  • 2.4 gHz
  • USB 2.0
  • Power supply @ 3.3 Volt
  • IEEE 802.11 b/g/n Wi-Fi compliant
  • RaLink RT5370N chip
  • Requires an external antenna (Part# AN-WIFI-01 or AN-WIFI-02)
  • Configurable as Access Point
  • Male strip soldered
  • Size 28x14mm
| Product description || Datasheet |

EUR 7.00


WIFI-2-IA - WiFi USB module (Int. antenna)

OEM Small USB module

  • 2.4 gHz
  • USB 2.0
  • Power supply @ 3.3 Volt
  • IEEE 802.11 b/g/n Wi-Fi compliant
  • RaLink RT5370N chip
  • Internal PCB antenna. The signal coverage is limited to few meters due to the internal antenna. If you need a greater distance evaluate the model with external antenna (Part # WIFI-2)
  • Configurable as Access Point
  • Male strip soldered
  • Size 28x14mm

Don't use the WIFI-2-IA model with Arietta G25 board because it could hangs the CPU. Use the WIFI-2 instead

| Product description || Datasheet |

EUR 2.00


AN-WIFI-01 - WiFi pcb external antenna

WiFi PCB antenna with 11 cm cable and UMC 2mm connector to be plugged on WIFI-2 module.

| Antenna datasheet |

EUR 7.00


AN-WIFI-02 - WiFi external antenna with SMA cable (Version FEMALE/MALE)

Antenna for WIFI-2 module

  • Rubber antenna with FEMALE SMA connector
  • RF cable with panel mountable MALE SMA connector and 2mm UMC connector with about 10 cm length cable

| Antenna datasheet | Cable datasheet |

EUR 7.00


AN-WIFI-03 - WiFi external antenna with SMA cable (Version MALE/FEMALE)

Antenna for WIFI-2 module

  • Rubber antenna with MALE SMA connector
  • RF cable with panel mountable FEMALE SMA connector and 2mm UMC connector with about 10 cm length cable

| Antenna datasheet | Cable datasheet |

EUR 0.20


STRIP-011 - Male strip 7x1 pin pitch 2mm

Male strip 7x1 pin pitch 2mm

  • Male strip
  • 7x1 pin
  • Pitch 2mm
  • Used on WIFI-2 module

EUR 0.30


STRIP-012 - Female strip 7x1 pin pitch 2mm

Female 7x1 pin pitch 2mm

  • Female strip
  • 7x1 pin
  • Pitch 2mm
  • Compatible with WIFI-2 module