XTERM-01 - 2.8 inch TFT display with resistive touch for Arietta G25

XTERM-01 is a bright (4 white-LED backlight) and colorful (256K) 2.8" TFT display with a resolution of 240x320 pixels with a 4-wire resistive touchscreen.


It has a 40 pin socket to plug an Arietta G25 Linux module and USB host connector.


XTerm-01 bottom view

Buildroot and Qt on Arietta G25 + XTERM-01

Links

Old articles

Buy

EUR 25.00


XTERM-01 - 2.8 inch TFT display with resistive touch for Arietta G25
  • 2.8 inch TFT display
  • Resistive touch screen
  • USB host port

Arietta G25 not included

| Product description |

EUR 25.00


ARIETTA-G25-V - ARM9 Linux Embedded Module (Green,128MB)

Arietta G25 is a small and low-cost multi-chip module that integrates:

  • a ARM9 @ 400Mhz CPU Atmel AT91SAM9G25
  • a 128MB of DDR2 RAM
  • up to 3 USB 2.0 host ports
  • 20x2 pads for strip pitch 2.54mm (100mil)
  • Solder mask color: green

Basic Version with no strips mounted. If you need to have any strip mounted take a look to the soldering services

Starting from July 2018 we make by default just color green Arietta G25. The only difference between the legacy black version and the new green version is the solder mask color. To order the legacy black version (Product id: ARIETTA-G25, MOQ 100 pcs) please contact us

| Product description |

EUR 30.00


ARIETTA-G25-256-V - ARM9 Linux Embedded Module (Green,256MB)

Arietta G25 is a small and low-cost multi-chip module that integrates:

  • a ARM9 @ 400Mhz CPU Atmel AT91SAM9G25
  • a 256MB of DDR2 RAM
  • up to 3 USB 2.0 host ports
  • 20x2 pads for strip pitch 2.54mm (100mil)

Basic Version with no strips mounted. If you need to have any strip mounted take a look to the soldering services

Starting from July 2018 we make by default just color green Arietta G25. The only difference between the legacy black version and the new green version is the solder mask color. To order the legacy black version (Product id: ARIETTA-G25-256, MOQ 100 pcs) please contact us

| Product description |

EUR 7.00


WIFI-2 - WiFi USB module (Ext. antenna)

OEM Small USB module

  • 2.4 gHz
  • USB 2.0
  • Power supply @ 3.3 Volt
  • IEEE 802.11 b/g/n Wi-Fi compliant
  • RaLink RT5370N chip
  • Requires an external antenna (Part# AN-WIFI-01 or AN-WIFI-02)
  • Configurable as Access Point
  • Male strip soldered
  • Size 28x14mm
| Product description || Datasheet |

EUR 2.00


AN-WIFI-01 - WiFi pcb external antenna

WiFi PCB antenna with 11 cm cable and UMC 2mm connector to be plugged on WIFI-2 module.

| Antenna datasheet |

EUR 0.80


MWS-01 - WIFI-2 on Arietta G25

Manual soldering of WIFI-2 on the Arietta G25. WIFI-2 module not included.

EUR 1.40


MWS-06 - Header on Arietta G25 J4 bottom side

Manual welding of a 20x2 pitch 2.54mm male connector on the bottom side of Arietta G25 including the STRIP-001 connector.