CM3-PANEL - 7 inch display designed for Raspberry Compute Module 3 lite

CM3-Panel is an OEM cheap display solution for Raspberry Pi 3 industrial modules thought to be used as GUI interface of your devices. Thanks to its thickness (<20 mm), it can be placed where there is not enough depth space for other solutions.

Main features

Price list

Documentation

Downloads

Raspberry Pi signals available on the rear pin strips:

On the bottom side are available two sets of 16x2 pin strip pitch 2.54mm on where is possible to plug an expansion board or two flat cables.

The number written near each pin on the silk screen indicates the GPIO number. The pin numbering starts from top left down to bottom right.

On each pin group are available the power supply lines (+5 volt, +3.3 volt and GND) and a set of GPIOs and control signals.

Connectivity

To keep the price as low as possible the CM3-Panel uses just the unique USB port available on the Raspberry compute module to communicate with external devices.

  • On model "U" the Raspberry Compute Model USB port is available on a USB-A female connector. In this case the connectivity can be make with an external USB adapter or using and USB HUB.
  • On model "W" the Raspberry Compute Model USB port is used by a WiFi adapter. In this case no more USB device can be connected to the CM3-Panel.

The following photo shows the differences between the two models.

Debug port

Using an USB to serial interface it is possibile to access to the debug port serial lines available on EXP2 connector as shown on this photo:

The lines used are:

EXP2 pin Signal
GND GND
33 Debug RX line
32 Debug TX line

The serial setup is 11500,8,N,1

Buy


CM3-Panel with Raspberry Pi module mounted

EUR 99.00


CM3-PANEL-W - Panel PC (WiFi version) with Raspberry Pi CM3L module

Out of stock- Available on February 20th

Panel PC carrier board for Raspberry Pi compute module 3 that includes:

  • CM3-PANEL carrier board
  • A 7 inch TFT LCD with 10 points capacitive touch
  • Raspberry PI CM3L compute module
  • A WiFi module @ 2.4 GHz
  • PCB antenna

The MicroSD is not provided

| Product description |

EUR 95.00


CM3-PANEL-U - Panel PC (USB version) with Raspberry Pi CM3L module

Out of stock- Available on February 20th

Panel PC carrier board for Raspberry Pi compute module 3 that includes:

  • CM3-PANEL carrier board
  • A 7 inch TFT LCD with 10 points capacitive touch
  • Raspberry PI CM3L compute module
  • USB 2.0 host port

The MicroSD is not provided

| Product description |

CM3-Panel without Raspberry Pi module mounted

EUR 75.00


CM3-PANEL-WE - Panel PC (WiFi version)

Out of stock- Available on February 20th

Panel PC carrier board for Raspberry Pi compute module 3 that includes:

  • CM3-PANEL carrier board
  • 7 inch TFT LCD with 10 points capacitive touch
  • WiFi module @ 2.4 GHz
  • PCB antenna

The Raspberry Pi compute module 3 is not provided
The MicroSD is not provided

| Product description |

EUR 71.00


CM3-PANEL-UE - Panel PC (USB version)

Out of stock- Available on February 20th

Panel PC carrier board for Raspberry Pi compute module 3 that includes:

  • CM3-PANEL carrier board
  • A 7 inch TFT LCD with 10 points capacitive touch
  • An USB 2.0 host port

The Raspberry Pi compute module 3 is not provided
The MicroSD is not provided

| Product description |

Accessories

EUR 42.00


WOODCASE-1 - Beech tree wood case for CM3-Panel

CNC made beech wood case designed to use the CM3-Panel as graphical user interface in home automation appliances.

Note:

  • This case is designed for the CM3-PANEL-W and not for the CM3-PANEL-U
  • A plastic wall adapter (Product id: ADP-503) is required to fix the case on the wall using a standard 503 box.
| Product description |

EUR 5.00


ADP-503 - Plastic wall adapter for CM3-Panel Wood case

Plastic adapter with dovetail insert to fix the WOODCASE-1 adapter on a 503 electrical box

| Product description |

EUR 29.00


CM3L - Raspberry Compute Module 3 lite edition (no eMMC)

The Compute Module 3 is a Raspberry Pi 3 in a more flexible form factor, intended for industrial application.

This is the lite version without the eMMC memory.

| Product descrption |

EUR 9.00


CAM-5MP - Raspberry Pi camera module 5MP 1080p ver 1.3
  • Fully compatible with CM3-Panel, CM3-Home and Raspberry Pi 3 A+ and B+
  • 5MP Omnivision 5647 camera module
  • Still picture resolution: 2592 x 1944
  • Video: supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 recording
  • 15-pin MIPI camera serial interface
  • Plugs directly into the CM3-Panel, CM3-Home and Raspberry Pi 3 A+ and B+ MIPI connector
  • Size: 20 x 25 x 9mm
  • Weight: 3g
  • Fully compatible with many Raspberry Pi cases

EUR 20.00


R-LITE-8G-EP - Raspbian Lite 8GB MicroSD for CM3-Panel

Ready to use microSD with preinstalled Raspbian Lite already configured to work with the CM3-Panel

Please note that this card contains Open Source code under GPL license and you are buying just the memory card not the software on it. Any rights to this software or support are not included.

| CM3-Panel |

EUR 20.00


R-DESK-8G-EP - Raspbian Desktop 8GB MicroSD for CM3-Panel

Ready to use microSD with preinstalled Raspbian Desktop already configured to work with the CM3-Panel

Please note that this card contains Open Source code under GPL license and you are buying just the memory card not the software on it. Any rights to this software or support are not included.

| CM3-Panel |

EUR 18.00


MICROSD8G-E - SanDisk industrial grade 8GB microSD

SanDisk 8GB Industrial grade microSD

| Product description |

EUR 24.00


R-LITE-16G-EP - Raspbian Lite 16GB MicroSD for CM3-Panel

Ready to use microSD with preinstalled Raspbian Lite already configured to work with the CM3-Panel

Please note that this card contains Open Source code under GPL license and you are buying just the memory card not the software on it. Any rights to this software or support are not included.

| CM3-Panel |

EUR 24.00


R-DESK-16G-EP - Raspbian Desktop 16GB MicroSD for CM3-Panel

Ready to use microSD with preinstalled Raspbian Desktop configured to work with the CM3-Panel

Please note that this card contains Open Source code under GPL license and you are buying just the memory card not the software on it. Any rights to this software or support are not included.

| CM3-Panel |

EUR 22.00


MICROSD16G-E - SanDisk industrial grade 16GB microSD

SanDisk 16GB Industrial grade microSD

| Product description |

EUR 34.00


R-LITE-32G-EP - Raspbian Lite 32GB MicroSD for CM3-Panel

Ready to use microSD with preinstalled Raspbian Lite already configured to work with the CM3-Panel

Please note that this card contains Open Source code under GPL license and you are buying just the memory card not the software on it. Any rights to this software or support are not included.

| CM3-Panel |

EUR 34.00


R-DESK-32G-EP - Raspbian Desktop 32GB MicroSD for CM3-Panel

Ready to use microSD with preinstalled Raspbian Desktop already configured to work with the CM3-Panel

Please note that this card contains Open Source code under GPL license and you are buying just the memory card not the software on it. Any rights to this software or support are not included.

| CM3-Panel |

EUR 32.00


MICROSD32G-E - SanDisk industrial grade 32GB microSD

SanDisk 32GB Industrial grade microSD

| Product description |

EUR 8.00


USB-3V-SER - USB to 3V3 serial converter

USB to 3V3 serial converter ad 3.3 volt with separated pin plugs

| Product description |

EUR 19.00


S26F-TSM - Sonoff S26 WiFi Smart Plug for EU with Tasmota Firmware

Sonoff S26 WiFi Smart Plug for EU with Tasmota Firmware already installed

Please note: This device is programmed with Tasmota firmware and it is impossible to restore with the original factory default firmware

EUR 15.00


PS12V2A-EU - Switching wall mount power supply

Switching wall mount power supply 12V 2A with european plug for:

| Datasheet |

EUR 1.00


CABLE-03 - Flat data cable (16 wires)

Flat data cable

  • Length: about 15cm
  • 16 wires
  • Female to female

Third party software supported on the CM3-Panel

info-beamer.com
Advanced digital signage platform. Fully hosted, programmable and easy to use.
Read more about the info-beamer implementation on CM3-Panel on: https://info-beamer.com/blog/info-beamer-on-cm3-panel


Emteria.OS
Industrial Android™
Read more about the Emteria.OS implementation on CM3-Panel on: https://emteria.com

Glossary of terms

  • DPI - Display Parallel Interface: Parallel RGB interface for display - On the CM3-panel in used in RGB666 mode (https://www.raspberrypi.org/documentation/hardware/raspberrypi/dpi/README.md).
  • PCM - Pulse-code Modulation: Digital representation of sampled analog. On the Raspberry Pi it's a form of digital audio output which can be understood by a DAC for high quality sound.
  • Yarm - Yet Another Radio Module: Is an ISM 868 MHz radio module designed by Acme Systems and powered by a Cortex M0+ CPU (https://www.acmesystems.it/yarm).
  • Touchscreen panel I2C interface: I2C serial interface with Goodix IC capacitive touchscreen controller.
Bruna Mandolino